2020 Aviation MB Day - Chesapeake District

2020 Aviation MB Day - Chesapeake District
Registration Begins
Last Day To Register
Martin State Airport 701 Wilson Point Rd # 5-501
Middle River, MD 21220, US
Share this event
The last date for registration has passed.
Baltimore Area Council
Chesapeake District

8th Annual Scouts BSA Aviation STEM Day’s

Aviation Merit Badge Day


Glenn L. Martin Museum

Martin State Airport
 701 Wilson Point Rd # 5-501
Baltimore, MD  21220


March 21, 2020

Rescheduled for June 6, 2020


Aviation Merit Badge (40 Max)

$20 Per Scout, $10 Per Adult

*Pre-Req’s must be completed in advance for credit


Merit Badge Prerequisites

     The following pages contain the prerequisites for the Aviation Days to be held at the Glenn L. Martin Museum in 2019. Scouts can only take one Merit Badge per event.  The prerequisites for each Merit Badge are in Bold and are highlighted in yellow  (Take careful note if the requirements state “Do ONE of the following” or  “do TWO of the following”) . The Merit Badges offered for the “Aviation Day” will be modified based on Scout pre-registration and Counselor availability.  As Merit Badge Counselors are assigned, they will update the prerequisites based on resources and their planned course of instruction. All completed Pre-Req’s can be also emailed before the event.

Questions or finalized Pre-req’s on the list can be addressed initially to: kvnboywonder@hotmail.com

Aviation Merit Badge Day 2020 prereqs

 Aviation (Martin Museum) 3/21/2020



  1. Do the following:

a. Define "aircraft." Describe some kinds and uses of aircraft today. Explain the operation of piston, turboprop, and jet engines.

b. Point out on a model airplane the forces that act on an airplane in flight.

c. Explain how an airfoil generates lift, how the primary control surfaces (ailerons, elevators, and rudder) affect the airplane's attitude, and how a propeller produces thrust.

d. Demonstrate how the control surfaces of an airplane are used for takeoff, straight climb, level turn, climbing turn, descending turn, straight descent, and landing.

e. Explain the following: the sport pilot, the recreational pilot and the private pilot certificates; the instrument rating.

  1. Do TWO of the following: (*Done at Event, Scouts Must complete Pre-rec questions at home)

a. Take a flight in an aircraft, with your parent's permission. Record the date, place, type of aircraft, and duration of flight, and report on your impressions of the flight.

b.* Under supervision, perform a preflight inspection of a light airplane. (Done at Event)

c. *Obtain and learn how to read an aeronautical chart. Measure a true course on the chart. Correct it for magnetic variation, compass deviation, and wind drift to determine a compass heading.

d. Using one of many flight simulator software packages available for computers. "fly" the course and heading you established in requirement 2c or another course you have plotted.

e. Explain the purposes and functions of the various instruments found in a typical single-engine aircraft: attitude indicator, heading indicator, altimeter, airspeed indicator, turn and bank indicator, vertical speed indicator, compass, navigation (GPS and VOR) and communication radios, tachometer, oil pressure gauge, and oil temperature gauge.

f. Create an original poster of an aircraft instrument panel. Include and identify the instruments and radios discussed in requirement 2e.

  1. Do ONE of the following: (*Done at Event)

a. Build and fly a fuel-driven or battery powered electric model airplane. Describe safety rules for building and flying model airplanes Tell safety rules for use of glue, paint, dope, plastics, fuel, and battery pack.

b. *Build a model FPG-9. Get others in your troop or patrol to make their own model, then organize a competition to test the precision of flight and landing of the models.

  1. Do ONE of the following: (*Done at Event)

a. *Visit an airport. After the visit, report on how the facilities are used, how runways are numbered, and how runways are determined to be "active."

b. Visit a Federal Aviation Administration facility control tower, terminal radar control facility, air route traffic control center, or Flight Standards District Office. (Phone directory listings are under U.S. Government Offices, Transportation Department, Federal Aviation Administration. Call in advance.) Report on the operation and your impressions of the facility.

c.* Visit an aviation museum or attend an air show. Report on your impressions of the museum or show.

  1. Find out about three career opportunities in aviation. Pick one and find out the education, training, and experience required for this profession. Discuss this with your counselor, and explain why this profession might interest you.
$10.00 per Adult
$20.00 per Scouts



Sign up for the NEW Area Scouter e-Newsletter!  Please designate your United Way Gift to the Baltimore Area Council.  Code 043 for Private and 33972 for Federal.